A living room with a wall of new windows and a sliding glass door
E
ES Windows · Enterprise

ES Windows Construction Service in Enterprise, NV

Free Estimate on SiteA Written Price Before Work StartsVetted, Background-Checked ProsServing Enterprise and Nearby
A new multi-panel patio door opening a kitchen to the patio
New double-hung windows in a dining room
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel
Get your free estimate

Why Enterprise Homeowners Choose ES Windows Construction

We provide independent ES Windows construction service in Enterprise, Nevada – repair, replacement, and new installation of ES Windows impact-rated and aluminum window and door systems – and we are not affiliated with or authorized by the manufacturer. What makes our ES Windows work different is that we come at it as installers and repairers rather than sellers: we’ve spent years specifying, fitting, and fixing these systems in Southern Nevada’s dust, heat, and monsoon wind, so we know which failures are predictable and which are not. For a free estimate on ES Windows work in Enterprise, call (844) 761-9449. We answer 24/7, and fast dispatch runs from 7am to 7pm.

Call (844) 761-9449

Enterprise is one of the fastest-built-up unincorporated suburbs in the Las Vegas Valley. That shapes ES Windows work here in a way it doesn’t elsewhere. A lot of what we see is either finishing out ground-up homes in the actively developing tracts near the southern edge toward Sloan and Seven Hills, or retrofitting the newer stucco-and-frame tract homes that went up quickly through the 2000s and 2010s and are now reaching their first real renovation cycle. Those homes were framed and glazed fast, and openings are often where the shortcuts show first.

Why Trust Enterprise Construction Co for Your ES Windows Construction?

A new casement window over a kitchen sink

Trust here comes from familiarity, not paperwork. Our technicians have up to 10 years of experience with ES Windows products specifically – the 7000 Series impact-rated horizontal slider, the 8000 Series single-hung impact window, the 5000 Series non-impact aluminum slider, and the French and sliding glass door systems. We know how those frames behave after a decade of 100°F+ summers and UV load, and we know which of their components wear first.

We’re clear about what we are: an independent service provider. We’re not a ES Windows dealer, we don’t claim factory training or certification, and we don’t stock or sell genuine ES Windows parts. What we do is repair, install, and service ES Windows equipment with quality parts that fit it – profile-matched rollers, seals, and hardware that meet the extrusion spec.

That distinction matters for your warranty. Service performed to standard practice on a sound frame shouldn’t put your coverage at risk, and we work in a way that respects the original assembly. We use one point of contact, a written estimate before anything starts, and a workmanship warranty on what we install. It’s your project, and one contractor from the window to the roof keeps it that way.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common ES Windows Construction Problems We Fix in Enterprise

ES Windows products are built for impact-rated and thermally broken performance, and most of what fails around them is not the frame itself. It’s the moving parts and seals that take the abuse. These are the five we run into most on Enterprise homes.

  • Worn rollers and tracks on horizontal sliders. Desert dust settles into the track, mixes with condensation, and grinds against nylon rollers until they flat-spot. The sash starts dragging, then drops out of level. Thermal cycling – hot days, cool nights – keeps working the hardware loose, so the problem shows up on the south- and west-facing units first.
  • Compressed or missing weatherstripping at the jamb. Wind-driven monsoon rain finds the path of least resistance, which is usually a corner seal or a weatherstrip that has flattened over thousands of thermal cycles. What looks like a sash problem is often a seal problem. Whistling at the corners during windy days is the tell.
  • Fogging from glazing seal failure. Insulated units exposed to extreme UV and sustained 100°F+ summers can lose their edge seal, and moisture gets into the cavity between the panes. Once a unit fogs, the insulating value is gone and the glass needs to be addressed, not cleaned.
  • Hard operation after years of thermal bind. Impact-rated sliders are heavier glass in a heavier frame, and the whole assembly expands and contracts more than a non-impact unit. If the frame is sound, this is usually a hardware and alignment fix; if the frame has shifted, it’s a bigger conversation.
  • Screen frame distortion and mesh corrosion. Aluminum screen frames and mesh take a beating in a high-dust environment, and mesh that’s been pressed or bent stops seating properly. On ES Windows sliders and single-hungs, a distorted screen frame also puts uneven load on the track when the sash slides.

One scenario we describe often, because it’s typical of the 7000 Series in this valley: a homeowner notices the sashes dragging and hears whistling at the corners on windy days. The usual cause is worn nylon rollers plus compressed weatherstripping along the jamb, made worse by dust in the track. A qualified local pro pulls the sash, replaces the rollers and corner seals with profile-matched parts, clears and lubricates the track, and re-checks the impact glazing seals for fogging before deciding whether repair is still the right call. That last check is the one that changes the answer.

ES Windows Parts & Our Repair-vs-Replace Approach

Installers setting a new window and checking it for level

Parts first, honestly. Where an ES Windows model is still supported, OEM rollers, weatherstripping, and hardware are the right call, and we source them. For discontinued lines, quality aftermarket rollers and seals that match the extrusion profile are the practical choice, and they perform. We don’t claim to stock ES Windows parts – we fit what your window actually needs.

Repair makes sense when the frame is sound and the problem is track, hardware, or seal related. That covers most of what we see in Enterprise. Full replacement is the honest recommendation when frames are bent, when glazing seals have failed across multiple units at once, or when the impact rating has been compromised in a way that can’t be restored. We’ll tell you which one you’re looking at, and the written estimate sets the final price either way.

If you’re not sure which side of that line your windows sit on, call (844) 761-9449 and we’ll talk it through. Estimates are free, and we’ll give you a line-item quote so you can see exactly what’s being replaced.

Our ES Windows Service Process – Step by Step

  1. 1
    Diagnosis. We check operation, track condition, roller wear, weatherstrip compression, corner seals, and glazing fog on every unit in question. We measure the frame for square, because a frame that’s out of square changes the whole recommendation. On ES Windows impact-rated units, we inspect the glazing seals specifically.
  2. 2
    Repair or install. For service, that means pulling the sash, fitting profile-matched rollers and seals, and re-setting hardware to spec. For new ES Windows installation, it means checking the rough opening, flashing, and sealant detailing before the frame goes in. On a stucco-and-frame home, the wall interface is where water gets in, so the flashing work matters as much as the glazing.
  3. 3
    Test. We operate every unit through its full range, check for drag and bind, verify the sash sits level, and confirm seals seat against the jamb. Then we water-test the interface on new installs and look for any seep at the corners.
  4. 4
    Warranty and handoff. You get the written estimate matched to what was done, a workmanship warranty on installation, and straight talk about what to watch for – dust in the track, seal condition, and fogging. One point of contact through the whole thing, and one warranty conversation at the end.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

ES Windows Products We Service & Install in Enterprise

A newly finished roof with a ridge vent and step flashing

We service the ES Windows sliding and single-hung window systems that make up most of what’s installed on Southern Nevada homes, including the 7000 Series impact-rated horizontal slider, the 8000 Series single-hung impact window, and the 5000 Series non-impact aluminum slider. We also handle the French and sliding glass door systems, where the same roller and seal logic applies at a much larger scale.

For replacements, we install ES Windows units as part of a window replacement project, and we treat the opening as seriously as the product – flashing, sealant, and stucco interface included. Whether you’re replacing one fogged unit or the west elevation of a two-story plan, the assembly has to be right or the product underperforms. We don’t claim to carry these in stock; we specify and install them to manufacturer spec. Window replacement in Enterprise typically runs $4,500 to $15,000 depending on the count and product, and the written estimate sets the final price.

We Also Service These Brands

ES Windows is one part of a bigger picture. We work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures, alongside impact-rated window and door systems from other manufacturers. That range means when an ES Windows project turns into a bathroom or roof conversation – and it often does – you’re not managing the handoff between three contractors. One company, from driveway to rooftop.

FAQs – ES Windows Construction Service in Enterprise

Is Enterprise Construction Co authorized by ES Windows?
No. We are an independent ES Windows service provider and are not affiliated with, authorized by, or certified by the manufacturer. We repair, install, and service ES Windows products using quality parts that fit them, and we’re upfront about that distinction from the first call.

Do you use quality parts that fit ES Windows equipment?
Yes. We use OEM ES Windows rollers, weatherstripping, and hardware where the model is still supported, and quality aftermarket rollers and seals matched to the extrusion profile where it isn’t. We don’t claim to stock genuine ES Windows parts, but what we fit is chosen to match your window’s actual specifications, not whatever is closest on a shelf.

How long does ES Windows service take?
Most roller and seal service on a few units is a single-visit job, because it’s hardware and weatherstripping work rather than glass replacement. Fogged glazing units and full replacements take longer since they involve ordering product and, in Enterprise, working around heat and monsoon scheduling. We’ll give you a realistic timeline with the written estimate.

What kinds of ES Windows products do you cover?
We cover the horizontal sliders, single-hung windows, non-impact aluminum sliders, and French and sliding glass door systems that make up most ES Windows installations in Southern Nevada, including impact-rated units in the 7000 and 8000 Series and 5000 Series non-impact aluminum. If you’re not sure what you have, we can identify it on site.

Will service void my ES Windows warranty?
Service performed to standard practice on a sound frame shouldn’t put your coverage at risk. Where we’re repairing rather than replacing, we stay within the original assembly and fit parts matched to the profile. Replacement work is different – if you’re replacing units, we’ll talk through what that means for any remaining coverage before anyone orders product.

How much does ES Windows construction cost in Enterprise?
Typical estimated ranges for the work that surrounds ES Windows projects here:

Service Typical estimated range
Window Replacement $4,500 – $15,000
Roof Repair $400 – $1,800
Small Bathroom Remodel $5,000 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000

These are estimates, and the written estimate sets the final price. Call (844) 761-9449 for an exact quote – estimates are free.

Book Your ES Windows Service in Enterprise, NV

Whether a slider is dragging, a corner seal is leaking, or you’re planning a full window replacement on a stucco-and-frame Enterprise home, we’ll give you a straight answer and a written estimate. One point of contact, quality parts that fit, and workmanship you can hold us to. Call (844) 761-9449. We answer 24/7. Fast dispatch from 7am to 7pm.

Written by the team at Enterprise Construction Co.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Enterprise Construction Co in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, and every job is priced in writing before work starts.

Areas we serve
A worker laying floor protection before work starts

See how we work

How a project runs from the first call to the finished job, and what is written down before any work starts.

How we work
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9449
Local Service Coverage
Driveway & Pavers EnterpriseDriveway & Pavers Spring ValleyDriveway & Pavers SummerlinDriveway & Pavers Las VegasDriveway & Pavers Sandy ValleyDriveway & Pavers ParadiseDriveway & Pavers WinchesterDriveway & Pavers HendersonDriveway & Pavers WhitneyDriveway & Pavers Sunrise ManorDriveway & Pavers North Las VegasDriveway & Pavers Boulder CityFence Installation EnterpriseFence Installation Spring ValleyFence Installation SummerlinFence Installation Las VegasFence Installation Sandy ValleyFence Installation ParadiseFence Installation WinchesterFence Installation HendersonFence Installation WhitneyFence Installation Sunrise ManorFence Installation North Las VegasFence Installation Boulder CityHome Additions & ADU EnterpriseHome Additions & ADU Spring ValleyHome Additions & ADU SummerlinHome Additions & ADU Las VegasHome Additions & ADU Sandy ValleyHome Additions & ADU ParadiseHome Additions & ADU WinchesterHome Additions & ADU HendersonHome Additions & ADU WhitneyHome Additions & ADU Sunrise ManorHome Additions & ADU North Las VegasHome Additions & ADU Boulder CityBathroom Remodeling EnterpriseBathroom Remodeling Spring ValleyBathroom Remodeling SummerlinBathroom Remodeling Las VegasBathroom Remodeling Sandy ValleyBathroom Remodeling ParadiseBathroom Remodeling WinchesterBathroom Remodeling HendersonBathroom Remodeling WhitneyBathroom Remodeling Sunrise ManorBathroom Remodeling North Las VegasBathroom Remodeling Boulder CityKitchen Remodeling EnterpriseKitchen Remodeling Spring ValleyKitchen Remodeling SummerlinKitchen Remodeling Las VegasKitchen Remodeling Sandy ValleyKitchen Remodeling ParadiseKitchen Remodeling WinchesterKitchen Remodeling HendersonKitchen Remodeling WhitneyKitchen Remodeling Sunrise ManorKitchen Remodeling North Las VegasKitchen Remodeling Boulder City

Request a Free Estimate in Enterprise

Tell us what you need - Enterprise Construction Co responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7