







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Enterprise, NV, for owners of Dvele prefabricated and panelized homes who need a seam re-sealed, a kitchen or bathroom updated, or an addition tied into an existing panelized shell. What sets our Dvele work apart is that we understand how factory-built wall, floor, and roof assemblies actually meet a site-built foundation, and we plan the finishes around those joints instead of over them. We’re an independent contractor. We are not affiliated with, authorized by, or a dealer for Dvele, and we don’t claim to be – our credibility comes from adapting Dvele shell packages to real site conditions. Call (844) 761-9449 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Enterprise Construction Co for Your Dvele Construction?

Our technicians have up to 10 years of experience, and the ones who take on Dvele projects have spent real time with panelized shells – the kind where the walls arrive engineered, the roof cassettes are set by crane, and the weather barrier is part of the panel rather than something added after the fact. That distinction matters on every job. A conventional stucco home lets a crew hide a rough edge behind sheathing and a scratch coat. A Dvele envelope doesn’t, because the panel face, the tape lines, and the seam geometry are all visible and all part of the air and water control layer.
We repair, install, and service Dvele equipment with quality parts that fit it. We don’t stock OEM or genuine Dvele components, and we don’t claim to. What we do is specify envelope components and sealants that meet Dvele’s intended performance, then supplement with proven compatible weather-barrier tapes and connection hardware when a factory part isn’t practical to source. Every repair is planned so it doesn’t compromise the shell’s warranty position: we don’t cut into a panel to save time on a plumbing run, and we don’t reseal a joint with a product that won’t hold up to an Enterprise summer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Enterprise
The failures we see on Dvele homes here tend to cluster around the places where a factory assembly meets site work. That’s not a knock on the product – it’s the nature of panelized construction in a climate with 100°F-plus summers and violent monsoon gusts.
- Panel joint and seam separation. Where factory wall panels meet above the site-set foundation, small movement shows up as a hairline gap. Sealant and air-barrier tape degrade faster than the panel itself, and once they open, air and water find the seam. We verify the panel connection and flashing detail before re-sealing, because taping over a joint that’s still moving only buys a season.
- Weather-barrier tape and seal failure at transitions. The panel-to-panel and panel-to-foundation transitions are the highest-stress points on the envelope. Temperature swings in the high desert work those taped joints constantly, and a failure there lets moisture into the wall cavity where it’s hard to see. This is the single most common cause of a slow interior stain in a Dvele home.
- MEP chase misalignment. Factory-routed plumbing and electrical rough-ins are set to plan, but slab penetrations and utility stub-outs are set in the field. When the two don’t line up, someone has to do field rework – and the wrong approach means cutting a panel that shouldn’t be cut.
- Finish cracking along panel seams. Drywall and plaster move with thermal expansion, and a panelized wall gives those finishes a defined line to crack along. Cracking along the same seam every year is a symptom worth diagnosing, not just patching.
- Foundation interface shifts. Slab-on-grade and reactive desert soils can let the foundation settle slightly out of plane with the panel line above it. Left alone, that turns a cosmetic crack into a water path. We check the interface as part of any seam repair.
Dvele Parts & Our Repair-vs-Replace Approach

Our default position on a Dvele shell is repair before replacement. A localized seam issue, a failed tape line, or a single rough-in that didn’t line up gets a targeted fix – re-seal, re-tape, verify the flashing, refinish the joint. Panel replacement only enters the conversation when the failure is structural or the envelope has gone bad across a broad area, because cutting out a factory panel and setting a new one is real work, and it’s rarely the right answer for a hairline crack.
For parts, we prioritize Dvele’s specified envelope components and sealants where they’re available, and we’re upfront when they aren’t. Compatible aftermarket tapes, sealants, and connection hardware can do the job well when the right material is selected for desert temperature cycling – not every tape spec’d for a mild climate holds up in Enterprise. We’ll tell you which path makes sense and why. Call (844) 761-9449 to talk through your options – estimates are free.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We inspect the reported symptom and then look at what’s around it – the panel connection, the flashing detail, the foundation interface, and the tape lines on both sides of the seam. On an interior complaint, we check the envelope before we touch the drywall, since a crack along a seam usually has a cause on the outside.
- 2
Repair or install plan. We lay out the sealant, tape, and hardware we’ll use, note any MEP rework and how we’ll handle it without cutting into a panel, and give you a written scope. For a kitchen or bath going into a Dvele home, we plan the fixture and cabinet layout around the panel module lines and the existing chases rather than treating the wall as a clean slate.
- 3
Execution and testing. We re-seal and re-tape per the intended envelope detail, verify the joint is stable, and check the transition with a moisture reading before we close anything up. On finish work, we let the joint detail and the material dry time dictate the schedule – stucco and coatings in Enterprise behave very differently at dawn than at 3pm in July.
- 4
Warranty conversation. We document what we did, what materials we used, and where they sit relative to the original shell, so you have a clear record if a warranty question ever comes up with Dvele or with us. One point of contact on our side covers the whole scope.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Enterprise
We work on Dvele prefabricated single-family home packages – the panelized wall, floor, and roof assemblies – as well as the modular and panelized ADU packages, high-performance envelope wall panels with integrated weather and air barriers, and factory-built roof and floor cassette systems. That means seam and transition repair, envelope re-sealing, finish repair along panel lines, and interior remodeling inside a panelized shell, including full kitchen remodeling, full bathroom remodeling, and home additions. We don’t claim to stock any of it. We service and install what’s there or what’s specified, and we’re honest about what a given repair actually involves.
We Also Service These Brands
Dvele is one brand in a much wider set we work with. On the same property, our scope runs to KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler plumbing fixtures, along with roofing, windows and doors, fencing, and driveways and pavers. That breadth means a Dvele owner can update a kitchen or bath without bringing in a separate contractor for every trade. One project manager, one warranty conversation.
FAQs – Dvele Construction Service in Enterprise

No. We are an independent contractor and we are not affiliated with, authorized by, or a dealer for Dvele. We repair, install, and service Dvele homes on our own account, using our familiarity with panelized construction rather than any factory authorization. Call (844) 761-9449 for a free estimate.
Yes. We specify envelope components, sealants, tapes, and connection hardware that fit Dvele assemblies and perform under Enterprise conditions. We prioritize Dvele’s specified components where available and supplement with proven compatible parts when they aren’t. We don’t stock OEM or genuine Dvele parts, and we won’t tell you otherwise.
A localized seam re-seal and refinish is typically a short job; envelope work across multiple transitions or a remodel inside a panelized shell takes considerably longer and depends on material lead times and dry time. The written estimate sets the scope and the schedule. Call (844) 761-9449 and we’ll give you a realistic timeline – estimates are free.
We cover Dvele prefabricated single-family home packages, modular and panelized ADU packages, high-performance envelope wall panels with integrated weather and air barriers, and factory-built roof and floor cassette systems. That includes seam repair, envelope re-sealing, MEP rough-in coordination, and interior kitchen and bath remodeling inside a Dvele shell.
It doesn’t have to. We plan every repair so it doesn’t cut into panel assemblies or disturb the shell’s intended envelope detail, and we document the materials and methods we use. A warranty question is ultimately between you and Dvele, but we make sure nothing we do creates an avoidable issue. Call (844) 761-9449 to discuss your situation.
Interior remodeling and repair on a Dvele home runs in the ranges below, and the written estimate sets the final price. These are typical estimated ranges, not quotes.
| Service | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Call (844) 761-9449 for an exact quote – estimates are free.
Book Your Dvele Service in Enterprise, NV
If you own a Dvele home in Enterprise and something along the shell needs attention, or you’re planning a kitchen, bath, or addition inside a panelized frame, call us. We’ll inspect the actual detail, explain what’s happening, and put the scope in writing. Call (844) 761-9449. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Enterprise Construction Co.












