







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose CWS Construction
We provide independent CWS construction service in Enterprise for homeowners whose CWS cabinetry and countertops need repair, refacing, or a proper reinstallation. What sets our CWS work apart is that we build and install to the manufacturer’s listed tolerances while staying free to recommend the better-value option when a CWS item is back-ordered or discontinued. One contractor from driveway to rooftop, and a single point of contact for the whole project.
To be clear on where we stand: Enterprise Construction Co is an independent contractor and is not affiliated with, authorized by, or sponsored by CWS. We read the brand’s own specification sheets, cabinet-box schematics and finish codes rather than selling from a showroom script. That matters when a door profile or finish has to match an existing run in an Enterprise kitchen. Our technicians have up to 10 years of experience with cabinet and countertop work. Call (844) 761-9449. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Enterprise Construction Co for Your CWS Construction?

CWS cabinetry rewards a contractor who understands how the parts fit together. Cabinet boxes, door fronts, hinges, glides and trim are a system, and a repair that ignores one piece of it shows up six months later as a door that rubs or a drawer that drops. We work from the CWS specification sheets and box schematics so a replacement door lines up with the existing run instead of almost lining up.
Parts matter here. When you need a match to an existing CWS run, we use CWS OEM doors, drawer fronts, hinges and trim. When those parts are discontinued or priced out of proportion, we turn to quality aftermarket hinges, glides and solid-wood boxes that fit the same opening. That’s a judgment call we make with you, not for you.
Warranty-safe practice is the other half. We install to the manufacturer’s listed tolerances, we don’t modify a box in a way that compromises its structure, and we document what we did. If a CWS finish or cabinet component is still under the manufacturer’s own coverage, our job is to avoid giving them a reason to deny it. Enterprise homeowners get a contractor who reads the fine print before touching the cabinets.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Enterprise
Enterprise is one of the fastest-built-up unincorporated suburbs in the Las Vegas Valley, and a lot of the housing stock went up fast in the 2000s and 2010s. Those homes are now hitting their first major renovation cycle, and CWS kitchens are showing the wear you’d expect from years of extreme desert heat, very low humidity, and 100°F+ summers. Here are the failures we see most.
- Thermofoil and laminate doors peeling at the edges. Dry desert air and summer heat cycling pull the adhesive bond loose, especially on doors that face an unshaded window or sit near the range. Once the edge lifts, moisture and dust get behind the skin and the peel travels. This is a door-front problem, not a box problem, which is why re-dooring or refacing often fixes it.
- Painted shaker and raised-panel doors checking, chipping and yellowing. High-traffic touch points – the door under the sink, the range-side doors, the drawer fronts – take the most hand contact and cooking grease. Over time the paint film checks along the panel edges and the finish dulls unevenly. Matching a touch-up to an aged painted finish is one of the harder color jobs in a kitchen.
- Particleboard and MDF boxes swelling after a slow leak. A drip under the sink, at the dishwasher connection, or at the ice-maker line soaks into the box before anyone notices. Swollen board doesn’t dry back to its original thickness, and the joints around it fail. By the time a homeowner sees the warped shelf, the damage is usually months old.
- Soft-close hinges and drawer glides sagging out of alignment. Soft-close mechanisms wear at the damper, and a hinge that no longer holds means doors that hang crooked and drawer fronts that drop. This is hardware, not cabinetry, and replacing the hardware restores the function without a full cabinet replacement.
- Countertop seams and edges failing over time. Quartz and solid-surface tops set on cabinets that have shifted or swelled will show seam separation and edge chips. The top is rarely the root cause. Getting the cabinets level and true before templating a new top is what keeps the next one flat.
Concrete pours and stucco work in Enterprise often have to be scheduled at dawn in summer because slab surface temps climb fast, and afternoon monsoon microbursts can peel fresh stucco or knock over unbraced framing. Interiors get scheduled around the same heat, which is why we plan cabinet installs and countertop templating for the cooler part of the day when the schedule allows.
CWS Parts & Our Repair-vs-Replace Approach

We don’t stock or carry CWS parts, and we’re not a CWS dealer. What we do is source quality parts that fit CWS equipment – OEM doors, drawer fronts, hinges and trim when a match to an existing run matters, and quality aftermarket hardware and solid-wood boxes when OEM parts are discontinued or priced out of proportion.
The repair-or-replace call comes down to the boxes. If the cabinet boxes are sound and square, refacing or re-dooring is the honest answer, and it keeps the countertop and layout you already have. If the boxes themselves are soft, swollen or out of square, a full replacement is the right move because a new door on a failing box just delays the problem. We’ll tell you which one you’re looking at after we pull a door and check.
A typical CWS kitchen with painted shaker doors usually shows peeling thermofoil or chipped paint at the door edges and sink front, soft-close hinges that no longer hold alignment, and a swollen box under the sink from a slow leak. A qualified local pro pulls the doors and drawer fronts, checks the boxes for swelling and square, replaces failing hinges and glides with matched hardware, re-doors or refaces the fronts, and templates a new quartz or solid-surface top once the cabinets are level and true. Full cabinet replacement gets reserved for cases where the boxes are soft or out of square. Call (844) 761-9449 to schedule a free estimate for your CWS kitchen in Enterprise.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We pull a door and a drawer, check the box for swelling and square, inspect the hinge and glide hardware, and look at the countertop seams. We photograph what we find so you can see the same thing we do.
- 2
Repair or install. For a repair, we replace hinges, glides, doors or drawer fronts, and we address the source of any leak before the new box goes in. For an install, we set cabinets level and plumb to the CWS listed tolerances and brace for the desert heat schedule.
- 3
Test. Every door gets opened and closed, every drawer gets pulled and pushed, and every soft-close damper gets checked. We re-align anything that rubs and confirm the countertop sits flat on a true base before we call it done.
- 4
Warranty. We hand over a written record of what was replaced and what was reused, which is what you need if a CWS component under the manufacturer’s own coverage ever comes into question. One warranty conversation, and it’s with us.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Enterprise
We service and install the kinds of CWS products that show up in Enterprise kitchens and baths: painted shaker and raised-panel cabinet doors, value-tier white and thermofoil slab cabinet fronts, bath vanity cabinet runs and matching linen towers, and engineered quartz and solid-surface countertop programs. We handle cabinet installation and refacing, quartz and granite countertops, and small and partial kitchen remodels. We don’t claim to stock any of it. What we bring is the ability to read the specification, match the finish, and install to tolerance.
We Also Service These Brands
We’re multi-brand, not single-brand dependent. Alongside CWS work, we handle KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz, and Kohler fixtures. If your kitchen already mixes brands, or you’re weighing a CWS item against another line, we can talk through the trade-offs. Enterprise homeowners get one contractor relationship across the whole property, from the driveway to the rooftop.
FAQs – CWS Construction Service in Enterprise

Is Enterprise Construction Co authorized by CWS? No. We are an independent CWS service provider, not affiliated with, authorized by, or sponsored by CWS. We read the brand’s specification sheets and install to its listed tolerances, but we don’t represent the manufacturer and we aren’t a dealer.
Do you use quality parts that fit CWS equipment? Yes. We use CWS OEM doors, drawer fronts, hinges and trim when you need a match to an existing run, and quality aftermarket hinges, glides and solid-wood boxes when OEM parts are discontinued or priced out of proportion. We don’t stock CWS parts, but we source what fits.
How long does CWS service take? Hardware and door-front work is often a day, while a refacing or re-dooring project typically runs several days depending on the run size, and a full kitchen remodel runs longer with countertop templating in the sequence. Enterprise heat means summer installs get scheduled for the cooler part of the day. Call (844) 761-9449 for a timeline on your specific project.
What kinds of CWS products do you cover? Painted shaker and raised-panel cabinet doors, value-tier white and thermofoil slab fronts, bath vanity cabinet runs and linen towers, and engineered quartz and solid-surface countertop programs. Cabinet installation and refacing, quartz and granite countertops, and small and partial kitchen remodels.
Will service void my CWS warranty? A proper repair or install done to the manufacturer’s listed tolerances shouldn’t, but the manufacturer’s coverage is theirs to interpret. We install to spec, avoid structural modification, and document everything so you have a record if a CWS component ever comes into question.
How much does CWS construction cost in Enterprise? Typical estimated ranges: cabinet installation $4,000-$13,000, countertop installation $2,000-$6,500, small kitchen remodel $9,000-$20,000, backsplash installation $800-$2,500, and kitchen island installation $3,000-$10,000. These are estimates, and the written estimate sets the final price. Call (844) 761-9449 for an exact quote – estimates are free.
Book Your CWS Service in Enterprise, NV
Whether you’re adding square footage or updating a single room, we handle CWS cabinetry, countertops and the rest of the property under one contractor relationship. One project manager, one point of contact, one warranty conversation. Enterprise is unincorporated Clark County, so permits on larger jobs run through the county’s building department, and we work that process for you. Call (844) 761-9449 for a free estimate.
Written by the team at Enterprise Construction Co.












