







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Ameristar Construction
Enterprise Construction Co provides independent Ameristar construction service in Enterprise, NV – we repair, replace and install Ameristar builder-grade fixtures, steel doors and HVAC equipment, and we step those products up where the builder-grade version can’t survive the desert. What makes our Ameristar work different is that we handle the whole consequence of a failure, not just the part: a dripping Ameristar tub valve that has soaked the wall behind it gets the valve replaced, the substrate repaired and the surround rebuilt by one contractor. We’re an independent service provider. We are not affiliated with, authorized by, or sponsored by Ameristar, and we don’t sell their products. We service them because homeowners across Enterprise already have them in the house. Call (844) 761-9449 to schedule a free estimate.
Why Trust Enterprise Construction Co for Your Ameristar Construction?

Ameristar products show up in Enterprise in predictable ways. American Standard’s builder-grade Ameristar line of toilets, faucets and tub/shower fixtures sits in thousands of the stucco-and-frame tract homes that went up fast through the 2000s and 2010s. Ameristar steel entry and storm doors turn up on the same houses. The Ameristar air conditioners and heat pumps (the residential M4 and M5 lines) sit on the side yards. Our technicians have up to 10 years of experience with exactly this kind of builder-grade equipment, and they know where it wears first in this climate.
We fit Ameristar equipment with quality parts that match it, and we work warranty-safe: we don’t cut corners that would leave you arguing with a manufacturer about coverage later. If the body of a fixture is sound, we replace the cartridge or valve. If the finish is already pitted through, we tell you plainly. That’s the whole approach.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Fix in Enterprise
Ameristar is a builder-grade line, and builder-grade means the parts are chosen to hit a price at the time of the build, not to last two decades in Las Vegas Valley water. The failure patterns below are what we see most often in Enterprise homes.
- Faucet cartridges and ceramic-disc valves scaling up. Ameristar kitchen and bath faucets develop hard-water scale in the cartridge within a few years here. The symptom is a drip at the spout or a weep at the base of the handle. Left alone, the drip stains the counter and the cabinet below.
- Tub and shower valves pitting and corroding. The Ameristar tub/shower valve bodies and drains pit in this water. Once the valve body is pitted, replacing the cartridge alone won’t stop the leak. The whole valve has to come out.
- Cracked fiberglass or acrylic surrounds at the drain flange. These surrounds crack at the drain flange and along the caulk line. When they do, water gets behind the wall. The drywall turns soft before the homeowner notices anything on the surface.
- Steel doors rusting at the bottom rail. Ameristar steel entry and storm doors come from the factory with thin paint and weatherstripping that fails in desert sun. The bottom rail rusts, the weatherstripping shrinks, and the door slab can warp.
- Heat pump and condenser coils fouling, capacitors and contactors failing. Ameristar M4 and M5 air conditioners and heat pumps take a beating after repeated 110°F-plus summers. Dirty condenser coils cut efficiency, and the capacitors and contactors fail.
Here’s how a typical Ameristar job usually goes. A homeowner notices a drip at a builder-grade Ameristar tub/shower valve, or a crack in the acrylic surround near the drain, and there’s soft drywall behind it. The usual cause is a failed cartridge plus years of hard-water scale and failed caulk letting moisture in. A qualified local pro shuts off the water, opens the wall, replaces the valve or cartridge with an OEM-matched part, repairs the substrate, and then reinstalls the surround or converts the tub to a walk-in shower with proper waterproofing before any tile goes down. The conversion is often the honest fix, because it removes the surround that was going to crack again.
Ameristar Parts & Our Repair-vs-Replace Approach

For Ameristar fixtures, we favor OEM replacement cartridges and valves when the body is still sound. Aftermarket cartridges tend to fail sooner in hard water, and the savings on the part disappear the first time you have to open the wall again. When the finish or the body is already pitted, upgrading to a quality fixture is the honest call. We’ll say so directly.
On the door and HVAC side, we prefer OEM-matched components for the same reason: they fit the equipment and keep the repair clean. We’re not a dealer and we don’t claim to stock genuine Ameristar parts. We source what fits and what holds up.
If you’re not sure whether your Ameristar fixture is worth repairing, call (844) 761-9449 for a free estimate.
Our Ameristar Service Process – Step by Step
- 1
Diagnosis. We find the actual failure, not just the symptom. On a dripping Ameristar faucet, that means checking the cartridge and the valve body, and looking for water behind the wall on a tub surround.
- 2
Repair or install. We replace the failed part with an OEM-matched component, or install a new Ameristar-compatible fixture. On a tub-to-shower conversion, we repair the substrate and waterproof before tile.
- 3
Test. We run the fixture under pressure and check for drips, weeps and moisture at the drain flange. On doors, we check the seal and the swing. No walk-away until it holds.
- 4
Warranty conversation. One point of contact, one warranty conversation. We tell you what’s covered and what isn’t, in plain terms.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Enterprise
We service the Ameristar products that actually show up in Enterprise homes: the American Standard builder-grade line of toilets, faucets and tub/shower fixtures; Ameristar steel entry and storm doors; and Ameristar residential air conditioners and heat pumps. On the fixture side, our work moves naturally into the remodel scopes these failures force – tub-to-shower conversions, walk-in showers, vanity replacements and cabinet installation. On the door side, we handle repair and replacement, and we’ll upgrade the door hardware and weatherstripping so the door lasts.
We Also Service These Brands
We’re multi-brand, not single-brand. When an Ameristar fixture has reached the end of its life, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures. That breadth matters: a bathroom that starts as an Ameristar valve repair often ends as a full remodel, and one contractor can carry it from the valve to the vanity to the cabinetry without a revolving door of specialists.
FAQs – Ameristar Construction Service in Enterprise

Is Enterprise Construction Co authorized by Ameristar? No. We are an independent service provider. We are not affiliated with, authorized by, or sponsored by Ameristar, and we don’t sell their products. We repair, replace and install Ameristar equipment because local homeowners already own it. Call (844) 761-9449 for a free estimate.
Can you get OEM Ameristar replacement cartridges for my builder-grade faucet? Yes, we source OEM replacement cartridges and valves when the fixture body is still sound. Aftermarket cartridges tend to fail sooner in hard water, so OEM is the better call when it fits. We don’t claim to stock genuine Ameristar parts; we source what fits. Call (844) 761-9449.
My Ameristar tub surround is cracking near the drain – is a tub-to-shower conversion the right fix? Often, yes. When the acrylic surround has cracked at the drain flange, water has usually already reached the substrate behind it, and patching the crack leaves the moisture in the wall. A conversion removes the surround that was going to crack again and adds proper waterproofing before tile. Call (844) 761-9449 for a free estimate.
Do you install Ameristar cabinets or are they a fixture brand only? Ameristar is a builder-grade fixture and equipment line. Cabinet installation is a separate scope, and we handle it with KraftMaid and Wellborn cabinetry. Call (844) 761-9449 to talk through the cabinet scope.
How do I know if my Ameristar steel door can be repaired or needs replacement? If the rust is surface-level and the door still swings true, it can often be repaired and repainted. If the bottom rail is rusted through or the slab has warped, replacement is the honest call. Call (844) 761-9449 and we’ll look at it with you.
What does a typical Ameristar-related bathroom repair or upgrade cost in Enterprise? Most Ameristar-related bathroom work in Enterprise falls into these typical estimated ranges. The written estimate sets the final price.
| Scope | Typical Estimated Range |
|---|---|
| Tub-to-Shower Conversion | $3500 – $10000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Cabinet Installation | $4000 – $13000 |
| Bathroom Vanity Installation | $800 – $3000 |
| Roof Repair | $400 – $1800 |
Call (844) 761-9449 for an exact quote. Estimates are free.
Book Your Ameristar Service in Enterprise, NV
If an Ameristar fixture, door or heat pump in your Enterprise home is failing, call (844) 761-9449. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price. We’ll tell you plainly whether repair or replacement is the honest call.
Written by the team at Enterprise Construction Co.












