







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Jerith Construction
We provide independent Jerith construction service in Enterprise, NV, for homeowners whose vinyl or aluminum fence and rail systems need repair, resetting or full installation. What sets our Jerith work apart is that we source directly from Jerith’s catalog as an independent installer, not through a dealer program, so we can specify the exact post caps, brackets and panel styles your property needs. Enterprise Construction Co is not affiliated with, authorized by or certified by Jerith. We’re an independent contractor that works on Jerith fence systems every week and knows how they behave in this valley’s sun and soil.
Why Trust Enterprise Construction Co for Your Jerith Construction?

Our technicians have up to 10 years of experience with Jerith vinyl and aluminum fence and rail systems, and that matters more than it sounds. Jerith builds ornamental aluminum fence, vinyl privacy fence and aluminum pool-code fencing with self-closing gates. Each of those product types fails in a different way, and each needs a different fix. An aluminum pool barrier with a self-closing hinge that has drifted out of alignment is not the same job as a vinyl privacy run with racked panels. We treat them separately.
We repair, install and service Jerith equipment with quality parts that fit it. We match Jerith panels, posts, caps and gate hardware so the profile and color stay consistent with the rest of your run, and we fall back to quality aftermarket hardware only where a Jerith part has been discontinued. We don’t claim to stock OEM inventory or to be a Jerith dealer. What we do is order the right component for your specific fence and install it to the manufacturer’s spec.
Warranty-safe practice guides every Jerith job we take. That means proper footing depth, correct concrete setting, hardware torqued to spec and gate alignment checked after the posts are set, not before. Skipping any of those steps is how a fence that should last gets called back in two summers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Fix in Enterprise
Most Jerith service calls in Enterprise come down to five recurring problems. Here’s what we see, and why each one happens.
- Vinyl posts settling and leaning in desert soil. Enterprise sits on ground that was graded and built over quickly, and some lots were never compacted the way they should have been before fence work went in. When posts are set too shallow or without proper concrete footings, the soil shifts and the whole run starts to lean. Gate sag and panel racking usually follow.
- Sun-baked vinyl panels on south- and west-facing runs. Enterprise summers hold 100°F+ for weeks, and the sun load on a west-facing fence line is relentless. Vinyl that takes that exposure year after year will chalk, yellow and turn brittle, particularly at the rout holes where the rails insert. That’s the first place a panel fails, because it’s the thinnest section of material taking the most stress.
- Aluminum pickets and gate hinges loosening at weld points. Wind-driven dust and irrigation overspray work on aluminum fence over time. Weld points that were sound at install can loosen or begin to corrode, and the gate hinge is usually the first hardware to show it because it carries the most movement.
- Gate latches and self-closing pool-code hardware drifting out of alignment. As posts shift even slightly, the geometry of the gate changes. A self-closing gate that met pool-code requirements when it was installed can stop latching or stop self-closing entirely. In Enterprise, that’s a safety issue as much as a maintenance one, and it’s the single most common reason we’re called to a pool barrier.
- Monsoon-season damage to fresh or unbraced runs. Enterprise gets monsoon microbursts that can knock over unbraced panels and peel coatings off metal. A fence that survived a decade of sun can still be taken out by one bad afternoon of wind if the posts weren’t set deep enough.
A typical Jerith vinyl privacy fence call starts with a gate that drags or a run that leans after a few summers, usually because posts were set too shallow or without proper concrete footings in soil that shifts. A qualified installer pulls the affected posts, resets them to depth in concrete, re-levels the panels and re-hangs or replaces the gate hardware so the run is plumb and the latch lines up again. That sequence is the whole job, and doing it out of order is why some fences get patched twice.
Jerith Parts & Our Repair-vs-Replace Approach

Getting the parts right on a Jerith fence is mostly about matching profile and color so a repair doesn’t read as a repair. We source the panels, posts, post caps and gate hardware that fit your existing run from Jerith’s catalog, and where a component has been discontinued we use quality aftermarket hardware that fits the same way. We don’t keep OEM inventory and we don’t claim to. We order what your fence needs.
The repair-versus-replace call comes down to how far the damage spreads. If a fence is failing at a few posts or a single gate, targeted repair is the honest answer, and it’s usually far less disruptive than tearing out a run that’s otherwise sound. If panels across a long stretch are chalked and brittle at the rout holes, piecemeal patching costs more over a few years than replacing that run once. We’ll tell you which situation you’re in before any work starts, and the written estimate sets the final price.
Call (844) 761-9449 to schedule a free estimate on your Jerith fence. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We walk the full run, not just the obvious problem. Post plumb is checked, panels are inspected at the rout holes for chalking and brittleness, and every gate is tested for latch and self-close. On a pool barrier, the gate hardware gets checked against the code requirement it has to meet.
- 2
Repair or install. Affected posts are pulled and reset to depth in concrete. Panels are re-leveled and re-secured. Gates are re-hung with hardware that matches the existing fence. On a new install, footings are set before anything goes vertical, because in this soil that’s the step that determines how the fence holds.
- 3
Test. Once the posts have set, every gate is operated and every latch is checked. A self-closing gate on a pool barrier gets tested repeatedly, not once. We confirm the run is plumb and the panel lines are consistent before we call it finished.
- 4
Warranty. We walk the finished work with you and explain what falls under workmanship and what falls to the manufacturer. Any documentation that applies to your Jerith components is passed along, and the warranty conversation stays with one point of contact.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Enterprise

We work on Jerith’s ornamental aluminum fence, including the Premier Series, and on its vinyl privacy fence lines, including the Grandview Series and the Reflections Series. We also install and service Jerith aluminum pool-code fencing with self-closing gates, which carries its own set of requirements in Enterprise because a pool barrier has to function as a safety device, not just a boundary line.
Beyond new installation, we reset leaning posts, replace damaged panels, rehang gates and replace latches and hinge hardware across all of those products. We don’t claim to stock any of it. We order what fits your fence and install it to spec, whether you’re finishing a new build in one of Enterprise’s developing tracts or retrofitting a fence on a home that’s hitting its first major renovation cycle.
We Also Service These Brands
Jerith is one line among many we work with. Enterprise Construction Co handles KraftMaid cabinetry, Cambria and Silestone countertops and Kohler fixtures across our kitchen and bath work, alongside a roster of roofing, window, door and hardscape manufacturers. If your property needs more than a fence line addressed, you’re not starting over with a new contractor for each trade. One project manager, one point of contact, one warranty conversation.
FAQs – Jerith Construction Service in Enterprise
No. We are an independent installer and service provider for Jerith fence systems. We are not affiliated with, authorized by or certified by Jerith, and we don’t operate a dealer program. We source directly from Jerith’s catalog so we can specify the exact components your property needs.
Yes. We source Jerith panels, posts and post caps that match the profile and color of your existing run, and we use quality aftermarket hardware only where a Jerith component has been discontinued. Call (844) 761-9449 to schedule a free estimate.
Gate sag in Enterprise is almost always a footing problem, not a gate problem. Soil that wasn’t compacted before the fence went in shifts over time, shallow posts move with it, and the gate geometry changes as a result. The fix is resetting the affected posts to depth in concrete and re-leveling the run, then re-hanging the gate. Call (844) 761-9449 for a free estimate on the repair.
Jerith’s aluminum pool-code fencing with self-closing gates is built for that purpose, but meeting the requirement depends on the installation, not just the product. Posts have to be set correctly and the self-closing hardware has to stay in alignment. Once a gate drifts, a barrier that passed at install can stop latching. We test self-close as part of every pool fence service call.
Any vinyl fence in Enterprise takes heavy sun load, especially on south- and west-facing runs. Over years of 100°F+ summers, panels can chalk, yellow and become brittle at the rout holes where rails insert. Proper installation delays that, and replacing individual panels before the failure spreads keeps the run intact longer. Call (844) 761-9449 if your panels are showing chalk or cracking.
It depends on how far the failure spreads. A fence failing at a few posts or one gate is usually a repair, and resetting those posts in concrete is the right call. If panels across a long run are chalked and brittle, replacing that run generally costs less than patching it piece by piece. We’ll give you a written estimate for either path.
Vinyl Fence Installation typically runs $3500 – $9000, and Aluminum Fence Installation typically runs $4000 – $10000, though the written estimate sets the final price. Repair work is quoted per job after we’ve diagnosed the fence. Call (844) 761-9449 for a free estimate.
| Jerith Service | Typical Estimated Range in Enterprise |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Book Your Jerith Service in Enterprise, NV
Whether your Jerith vinyl run is leaning, your aluminum pool gate has stopped self-closing, or you’re planning a new fence for a home inside the 215 Beltway or out toward the Sloan/Seven Hills edge, we’ll diagnose it, quote it in writing and do the work to manufacturer spec. Estimates are free. Call (844) 761-9449. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Enterprise Construction Co.












