







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Delta Construction
Enterprise Construction Co provides independent Delta construction service in Enterprise, NV – installing and repairing Delta valves, trims, and faucets as an independent remodeler, not a Delta dealer. Our technicians have up to 10 years of experience working with Delta products, and we source quality parts that fit them. Delta is a plumbing fixture and faucet brand, so most of our Delta work runs through showers, tubs, and bathroom remodels. We’re not affiliated with or authorized by Delta; that independence is exactly why we can recommend the right trim or rough-in for your project rather than the one a manufacturer wants to move. Call (844) 761-9449 to set up a free estimate.
Why Trust Enterprise Construction Co for Your Delta Construction?

Delta service isn’t abstract for us. Our technicians have up to 10 years of experience pulling Delta trim, seating cartridges, and re-testing temperature and pressure after a repair. That matters in Enterprise, where hard water wears on valves and finishes faster than most manufacturers’ parts diagrams account for. We know which symptoms point to a scaled cartridge versus a pitted seat versus a failed rough-in body, and we plan the tile or surround work that comes with each.
We’re an independent Delta service provider, not a Delta dealer, so we use genuine Delta OEM cartridges and seats where they belong rather than whatever aftermarket part a supply house has on hand. Aftermarket cartridges are the most common cause of a repeat leak or temperature drift after a bad repair, and we’ve corrected plenty of those.
We also cover seven service lines – driveways and pavers, fencing, additions and ADUs, bathrooms, windows and doors, roofing, and kitchens – so a Delta upgrade fits into a bigger project without handoffs to another trade. One project manager, one warranty conversation. That’s the difference when you’re remodeling more than a single fixture.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Enterprise
Delta fixtures are well-built, but they live hard lives in desert homes. These are the issues we see most often on Enterprise calls:
- Monitor cartridge scale and hard-water binding. Water in the Las Vegas Valley leaves mineral deposits on the cartridge, so the handle gets stiff and the valve starts to drip or drift toward hot. The fix is usually an OEM cartridge and seat swap, not a new valve.
- MultiChoice Universal rough-in valve seat pitting. The rough-in body sits behind the finished wall. When its seats pit or scale, the leak shows up behind the surround, which means tile or wall removal just to reach it. That’s why we check the body closely before recommending a rebuild.
- Aged tub spouts and shower arms loosening. As a home settles, the original thread sealant on tub spouts and shower arms gives way. The fitting loosens, corrodes, or pulls free mid-shower. A quick re-seal or swap during the same visit solves it.
- Finish pitting and flaking on lower-tier chrome and stainless trims. Constant hard-water spotting and wiping wears the finish on entry-level trims. If a trim’s finish is failing while the valve is sound, a trim change is often the whole fix.
- Drip at the spout after temperature adjustment. A valve that runs fine until it’s nudged toward warm often has a damaged seat inside the cartridge. The symptom hides for months, then shows up as a steady drip.
None of these are unusual in Enterprise’s 1990s-to-2020s stucco-and-frame tract homes, which are now hitting their first major renovation cycle. Call (844) 761-9449 for a free estimate once you’ve noticed one.
Delta Parts & Our Repair-vs-Replace Approach

On Delta Monitor and MultiChoice valves, we use genuine Delta OEM cartridges and seats. We don’t claim to stock or carry OEM parts, and we’re not a Delta dealer, but we source the right fit from supply channels that have it available in the Las Vegas Valley. That distinction matters: aftermarket cartridges are the biggest source of repeat leaks and temperature drift.
On an older valve, rebuilding with OEM parts is almost always cheaper than opening the wall to replace it. We swap the entire valve only when the rough-in body is cracked or badly scaled and a rebuild won’t hold. That call gets made after inspecting the body, not before. When we do replace, we estimate the tile or surround work alongside the plumbing so there’s no surprise line item later. Every price comes from a written line-item quote, and that written estimate sets the final price. Want to know which path your Delta valve needs? Call (844) 761-9449.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We shut off water, pull the trim, and inspect the cartridge, seats, and rough-in body for scale, pitting, and cracks. On a Monitor valve, that means checking whether the stiffness is cartridge or seat.
- 2
Repair or install. We install an OEM cartridge and seat, re-seal a loose tub spout or shower arm, or fit new trim. On a bigger remodel, we set the MultiChoice rough-in at the correct depth before tile goes up so future service doesn’t require demolition.
- 3
Test. We re-pressurize and test temperature and pressure at the fixture, then run the valve through hot, cold, and mixed positions to confirm there’s no drip and no drift.
- 4
Warranty and documentation. We leave you the part numbers used and how the work is warranted so service is traceable later. Prefab and prefab-adjacent additions and full remodels also get the same documented process across our seven service categories.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Enterprise
Delta work at Enterprise Construction Co covers the fixture side of a bathroom or kitchen project. We service and install Delta Monitor 14 Series tub/shower trim, Monitor 17 Series with the MultiChoice Universal rough-in valve, the Classic single-handle kitchen faucet, and the Lahara and Trinsic bath collections. In practice that means walk-in showers and shower remodeling, tub-to-shower conversion, full bathroom remodeling, and kitchen faucet replacement alongside the cabinetry and countertops we build. We don’t claim to stock any of these; we source them for each project. If you’re planning a remodel, we’ll spec the right trim and rough-in for the tile and layout you want.
We Also Service These Brands
Delta is one brand among many. Enterprise Construction Co works across a curated roster that includes KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures and Grohe plumbing. That breadth means a bathroom remodel doesn’t stall because one brand is backordered; we can pull a comparable piece from another line we work with. Whether you’re adding square footage or updating a single room, one contractor covers the whole project from driveway to rooftop.
FAQs – Delta Construction Service in Enterprise

No. We are an independent Delta service provider and remodeler, not a Delta dealer, and Delta does not authorize or certify our work. We install and repair Delta products because they’re common in Enterprise bathrooms, and because our technicians have the experience to service them correctly.
Yes. We use genuine Delta OEM cartridges and seats on Monitor and MultiChoice valves rather than aftermarket parts. Aftermarket cartridges are the most common cause of repeat leaks and temperature drift, so we avoid them on Delta service. Call (844) 761-9449 for details on your specific fixture.
Most single-fixture Delta repairs finish in a few hours once parts are on hand. A cartridge and seat replacement runs about an hour; a tub-to-shower conversion or full bathroom remodel takes days to weeks depending on scope. We give you a timeline in the written estimate. Call (844) 761-9449 to schedule a free estimate.
We service and install Delta tub/shower trim, MultiChoice rough-in valves, single-handle kitchen faucets, and bath collections including Lahara and Trinsic. That covers most Delta plumbing fixtures in a home bathroom or kitchen. Call (844) 761-9449 to confirm your specific product.
Correctly installed OEM Delta parts generally preserve your warranty. Using aftermarket cartridges or improper rough-in depth can affect a claim, which is why we use OEM parts and install to manufacturer spec. We can work with your insurer on any related claim. Call (844) 761-9449 to talk through your situation.
Typical estimated ranges for Enterprise Delta-related bathroom and kitchen work run from the line items below. These are estimates only, and the written estimate sets the final price:
| Service | Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Call (844) 761-9449 for an exact quote. Estimates are free.
Book Your Delta Service in Enterprise, NV
If your Delta shower valve is dripping, your handle has gone stiff, or you’re planning a tub-to-shower conversion in Enterprise, we can help. Enterprise Construction Co serves the area with independent Delta work, OEM parts, and one point of contact for a bigger remodel. Call (844) 761-9449. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Enterprise Construction Co.












