







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Enterprise Homeowners
A fence fails quietly before it fails loudly. Posts rot at the soil line, gates start dragging, and one windy afternoon a panel leans where it shouldn’t. In Enterprise, where summer sun bakes the west-facing side of every yard and monsoon gusts test every post, a fence that was set shallow or fastened with the wrong hardware will show it within a couple of seasons. That’s the problem we solve: posts set to depth in our caliche-heavy soil, hardware rated for desert sun, and panels that stay true.
Our technicians have up to 10 years of experience building and repairing fences across the Las Vegas Valley, and we work with a curated roster of manufacturer brands so the material under your posts matches what the job actually demands. Fencing is one of seven service categories we handle, which means if your project also touches the driveway or the side yard, one contractor manages all of it. Same-day service is available in Enterprise on many jobs. Call (844) 761-9449 to schedule your free estimate.
What Our Fence Installation Service Includes
Every fence job starts with the same question: what is this fence protecting, and from what? A privacy screen along a neighbor’s second story is a different build from a four-foot boundary line or a pool enclosure. Below is how we approach each material and repair type we handle in Enterprise.
Wood Fence
Wood is the classic privacy fence, and it’s still the material most Enterprise homeowners choose for backyard screening. It needs a fence when you want height, warmth, and the ability to stain or paint it to match the house. We build wood fences with posts set deep into pre-augured holes and set in concrete, because our soil holds moisture unevenly and a shallow post will lean after the first wet winter. We also brace every gate opening so the frame doesn’t sag under its own weight.

Chain Link Fence
Chain link is the practical choice for side yards, pet runs, and property lines where visibility matters more than privacy. You need it when you want durable containment at a lower material cost than wood or vinyl. We install chain link with tensioned top rails and bottom rails so the fabric doesn’t sag or curl, and we set terminal posts in concrete the same way we do wood posts. If you’re enclosing a corner lot or a long run, we’ll talk through post spacing before we dig.

Vinyl Fence
Vinyl fencing holds its color and finish through desert sun without the annual staining that wood demands. It’s the right call when you want a clean, consistent privacy line and you’d rather not repaint every few years. We install vinyl to manufacturer spec, with posts set on footings sized to the panel height and wind load, and we use the brand’s own hardware rather than generic brackets that crack in the heat. Typical vinyl fence installation in Enterprise runs $3,500 – $9,000 depending on linear footage and gate count.

Aluminum Fence
Aluminum fencing gives you the look of wrought iron without the rust and repainting. It suits front-yard boundaries, pool enclosures, and decorative side-yard runs where you want visibility and a finished appearance. We specify powder-coated aluminum from manufacturers like Ameristar because the coating holds up under UV far better than painted steel, and we set posts plumb to the elevation rather than eyeballing it. Estimated aluminum fence installation in Enterprise typically lands at $4,000 – $10,000 depending on height, style, and total run.
Iron Fence
Iron fencing is the traditional choice for properties that want a formal frontage and a security line that reads as permanent. It’s heavier than aluminum, so it needs sturdier posts and a footing that accounts for the added weight. We install iron with welded or bolted panel connections depending on the style, and we prime and paint any field-cut ends so rust doesn’t start at the weld. If your front yard faces a long sightline, we’ll lay out the panel rhythm before ordering.
Fence Repair
Not every job needs a full replacement. A leaning post, a broken picket, a gate that won’t latch, or a rusted chain link section can often be repaired for far less than a new run. We assess the whole fence line, not just the visible damage, because a single failed post usually means the neighboring posts are compromised too. Where repair makes sense, we repair. Where it doesn’t, we’ll tell you plainly and quote the replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with ActiveYards and Barrette for vinyl systems, and with Master Halco and Ameristar for aluminum and steel fencing. Each of these manufacturers builds to a slightly different spec, and knowing them matters on install day. ActiveYards panels use their own post-and-rail connection system, so we order their hardware rather than mixing components that won’t seat correctly. Barrette vinyl is engineered around specific wind ratings, and we size footings to match so the fence performs the way the manufacturer intended.
On the aluminum side, Master Halco and Ameristar each have their own panel spacing and bracket lines. We know where their coatings wear and where their gates bind after a few summers of expansion, which is usually at the hinge side if the posts weren’t set plumb. We install to manufacturer spec because that’s where the material’s warranty lives, and we’ll walk you through what the brand covers before you commit. Whether you have ActiveYards, Barrette, Master Halco, Ameristar, or any other make, we can help.
Signs You Need Fence Installation Right Now
- Posts leaning or pulling out of the ground. A post that tilts more than a few degrees has usually rotted at the soil line or was set too shallow. Left alone, it takes the panels and the gate frame down with it, and the repair cost climbs fast.
- Gates that drag, stick, or won’t latch. A dragging gate is a hinge or post problem, not a gate problem. It’s also a security gap, because a gate that won’t latch is a gate that swings open in the wind.
- Rust or corrosion on metal panels. Chain link and iron both fail at the weld points first. If you’re seeing rust at the terminal posts or along the bottom rail, the fence is on its way out, especially where irrigation spray hits it.
- Broken or missing pickets after a wind event. Desert gusts can pop pickets loose or crack vinyl panels. A quick inspection along the entire run tells you whether it’s an isolated repair or a sign the fence was under-built for the wind load.
- Missing privacy between you and a neighbor. If a new second-story window looks straight into your yard, your fence height no longer does its job. That’s a replacement conversation, not a repair one.
Our Fence Installation Process – Step by Step
- 1
Site walk and layout. We walk the property line with you, confirm the fence height and material, and mark post locations. On any boundary question, we ask you to confirm the line before we dig, because a fence in the wrong place is a much bigger problem than a fence in the right one.
- 2
Utility locate and permit check. Before any auger touches the ground, we call for utility locates so we don’t hit irrigation, gas, or electrical lines buried along the run. Most cities require a permit for taller fences and for anything near a pool, so we confirm the local requirement with your city’s building department and pull what’s needed.
- 3
Post holes and footings. We auger to depth and set each post in concrete, sized to the fence height and the wind load the material is rated for. In Enterprise soil, depth and footing size are the whole ballgame; a post set shallow will lean within a season regardless of how good the panels are.
- 4
Panel and gate installation. We set panels plumb and level to the grade, then hang gates with hardware adjusted so they swing clean and latch without effort. We check gate clearance against seasonal ground movement, since our soil expands and contracts across the year.
- 5
Final walkthrough and warranty conversation. You walk the completed fence with us, we test every gate, and we tell you in plain language what the manufacturer covers and what our workmanship warranty covers. Any issue on the final walk gets fixed before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Enterprise?

Fence installation in Enterprise typically runs $3,500 – $9,000 for a vinyl privacy fence and $4,000 – $10,000 for aluminum, depending on total linear footage, height, gate count, and how much clearing the line needs. A short side-yard run sits at the low end; a full-perimeter privacy fence with two or three gates sits at the high end. Wood and chain link generally land below those figures, while iron and commercial-grade runs can climb above.
Several things move the number. Total linear footage is the biggest driver, followed by fence height and material. Gate count matters more than people expect, because each gate needs a braced frame and heavier hardware. Site access affects the job too: a run that backs up to a slope or has to be hand-carried around a pool takes longer than an open side yard. Post depth and footing size also factor in, since our soil demands deeper footings than a coastal market would.
To avoid overpaying, get a written line-item estimate that separates material, labor, footings, gates, and any permit cost. Ask whether the quote includes haul-away of the old fence. Ask what the brand warranty covers and what the workmanship warranty covers, because those are two different promises. Our estimates are free, itemized, and fixed: the written estimate sets the final price, and we don’t hand you change orders once the work starts. Call (844) 761-9449 for an exact quote.
Fence Installation Near Enterprise – Our Service Area
We work throughout Enterprise and the surrounding valley, including Spring Valley, Summerlin, Las Vegas, Paradise, Winchester, Henderson, North Las Vegas, and Boulder City. Scheduled work is dispatched Sunday through Friday, 7am to 7pm, and we’re closed Saturday. If you’re outside Enterprise, fence installation in Spring Valley follows the same process and the same material standards.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Enterprise

Fence installation is the process of setting posts, hanging panels, and mounting gates along a property line or enclosure to create a boundary, privacy screen, security line, or pet containment. It involves a utility locate, post holes set in concrete at a depth matched to the soil and wind load, and panels leveled to the grade. In Enterprise, our soil and sun make post depth and hardware choice the two factors that decide how long a fence lasts. Call (844) 761-9449 to talk through your project.
Most residential fence installations take one to three days once material is on site, depending on total footage, gate count, and site access. A short side-yard run can finish in a single day. A full-perimeter fence with multiple gates or tricky access usually spans two to three. Material lead time is the wildcard, especially on custom vinyl colors or styles, and we’ll give you a realistic window with your written estimate.
Vinyl fence installation in Enterprise typically runs $3,500 – $9,000, and aluminum fence installation typically runs $4,000 – $10,000, depending on footage, height, gates, and site conditions. Wood and chain link usually come in lower; iron and commercial fencing can run higher. The written estimate sets the final price, with no change orders once work begins. Call (844) 761-9449 for an exact quote – estimates are free.
Yes. We install both ActiveYards and Barrette vinyl systems, along with Master Halco and Ameristar aluminum and steel products. We order each manufacturer’s own hardware and set posts to their spec, because that’s where the material warranty lives. If you already have a brand in mind or a fence that’s failing, tell us what it is when you call and we’ll talk through the right approach.
Same-day service is available in Enterprise on many fence repair jobs, and installation work is scheduled based on material lead time. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday.
Your fence carries two warranties: the manufacturer’s warranty on materials and our workmanship warranty on installation. The manufacturer covers defects in the panels, posts, and hardware, and the workmanship warranty covers our setting, leveling, and gate installation. We walk you through both in plain language at the final walkthrough, so you know exactly what’s covered and for how long.
Clear the fence line of furniture, planters, hoses, and anything else within a few feet of the run, and unlock any gate we’ll need to pass through. Mark irrigation heads, sprinkler lines, and buried landscape lighting yourself, since a utility locate covers public utilities but not your own yard lines. Keep pets and vehicles clear of the work area, and make sure someone is available to confirm the property line before we dig. Then just call (844) 761-9449 once you’re ready to book.
Schedule Your Fence Installation Service in Enterprise Today
Fencing is one piece of a property upgrade, and we handle the rest of it too: Enterprise Construction Co manages fence installation, driveway and pavers, home additions and ADUs, bathroom remodeling, windows and doors, roofing, and kitchen remodeling under one contractor relationship. Call (844) 761-9449 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Enterprise Construction Co.












